PVC/Urethane adhesive with accelerator. Can be used to bond PVC to rubber (Hypalon, neoprene, etc). When bonding rubber to rubber, Clifton Hypalon Adhesive is your best choice. Materials NeededStabond and AcceleratorPVC Cleaner (MEK- Methyl Ethyl Ketone), or Toluol (Toluene) - see recommendation below.Roller Rasp or Pro RollerYour patching material. See material for all our patching material options.180 grit sandpaper (optional)Lint-free towelPencilContainer with lid (margarine tub works well)RecommendedWork in a well ventilated area (garage or shady area works well)Use a respirator and chemical resistant gloves (i.e. Nitrile gloves).Eye protectionSee container for further precautions.Use methyl ethyl ketone (MEK) to clean any urethane or PVC materials and use toluene to clean any Hypalon or synthetic rubber materials.PreparationAll contact/gluing surfaces must be thoroughly buffed, using a sanding wheel, 150 or 180 grit sandpaper, or a roller rasp. Just buff the fabric shine off; don't rasp down to the threads.Cut patch 2" larger than damaged area and round the edges.Clean the buffed surfaces with recommended solvent, using a lint-free towel.Trace area of patch with a pencil.